CHETNA LEARNING SPHERE

CHETNA LEARNING SPHERE

SOUND WAVE

Q-What is an echo? State the condition for hearing a clear echo and find the minimum distance of the reflecting surface. (Speed of sound = 344 m/s)

Ans-An echo is the repetition of sound heard after it is reflected from a large, hard surface such as a wall, cliff or hill. The reflected sound must reach the ear at least 0.1 s after the original sound. The sound travels to the surface and back, so 2d = v × t:
d = (344 × 0.1)/2 = 17.2 m. The surface should be at least about 17 m away (17.2 m at 344 m/s). It must also be large and hard enough to reflect the sound well.

Q-Two sounds have the same pitch and loudness but sound different. Explain.

Ans-Pitch depends on the fundamental frequency and loudness on the amplitude, and both are the same here. The sounds still differ in quality (timbre), because they contain different overtones with different relative strengths, which gives them different waveforms. This is why we recognise the voices of two people singing the same note at the same loudness.

Q-What is meant by the quality or timbre of a sound? Why can we tell a sitar from a flute even when both play the same note at the same loudness?

Ans-Quality (timbre) is the characteristic of a sound that lets us distinguish two sounds of the same pitch and loudness. It depends on the waveform, which is determined by the number, frequencies and relative amplitudes of the overtones mixed with the fundamental note. A sitar and a flute playing the same note have the same fundamental frequency, but each produces a different set of overtones, so their waveforms differ and we can recognise each instrument.

Q-Define pitch. On which physical quantity does it depend, and why does a woman’s voice have a higher pitch than a man’s?

Ans-Pitch is the characteristic of a sound by which a shrill (high) note is distinguished from a flat (low) note. It depends on the frequency of the sound: a higher frequency gives a higher pitch. A woman’s vocal cords are shorter and thinner and vibrate faster than a man’s, so her voice has a higher frequency and a higher pitch.

Q-What is resonance? Give two examples where it is useful and two where it is harmful.

Ans-Resonance is the phenomenon in which a body vibrates with maximum amplitude when the frequency of the applied periodic force equals its natural frequency.
Useful: (i) tuning a radio or television receiver, where an electrical circuit is made to resonate with the station’s frequency; (ii) musical instruments, where the sound box or air column resonates to make the sound louder; (iii) the resonance tube used to measure the speed of sound.

Harmful: (i) a bridge can collapse if marching soldiers’ steps match its natural frequency, which is why soldiers break step on a bridge; (ii) the Tacoma Narrows Bridge collapse (1940) was caused by wind-driven oscillations; (iii) vibrations of machines or buildings during earthquakes can cause damage if they match the structure’s natural frequency.

Q-What is reverberation? How does it differ from an echo? How is it reduced in an auditorium?

Ans-Reverberation is the persistence of sound in a hall after the source has stopped, caused by repeated reflections from the walls, ceiling and floor. An echo is a single, distinct repetition heard after at least 0.1 s, while in reverberation the successive reflections arrive so quickly that they merge with the original sound and blur it. Reverberation is reduced by using curtains, carpets, upholstered seats, porous wall panels and rough or perforated ceilings, which absorb sound.

Q-In a resonance tube experiment, a tuning fork of frequency 480 Hz gives the first resonance at 17 cm and the second at 52 cm. Find the speed of sound in air.

Ans-The distance between consecutive resonance positions is half a wavelength:
λ/2 = l₂ − l₁ = 52 − 17 = 35 cm, so λ = 70 cm = 0.70 m
v = fλ = 480 × 0.70 = 336 m/s.

Q-Why does a tuning fork produce a louder sound when its stem is pressed against a table?

Ans-This is forced vibration. A tuning fork alone has a small area and sets only a little air in motion. When its stem is pressed against a table, the table is forced to vibrate with the same frequency. Its large surface sets a large mass of air in vibration, so more energy is carried to the ear and the sound becomes louder. The sound dies out sooner, because the energy is given up faster.

Q-A ship sends an ultrasonic pulse and receives its echo from the sea bed after 4 s. If the speed of sound in sea water is 1500 m/s, find the depth of the sea.

Ans-2d = vt = 1500 × 4 = 6000 m
d = 3000 m. The sea is 3 km deep.

Join Our Premium Content

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top